Your Trusted Partner in Waterproofing

WARRIOR SS-10 Shower Seal – DIY Waterproofing Protection Without Hacking Tiles

WARRIOR SS-10 Shower Seal is a DIY waterproofing solution designed to help solve water leakage and seepage issues in bathrooms and wet areas without hacking away existing tiles or waterproofing systems. Easy to apply and suitable for homeowners, SS-10 penetrates tile joints and porous surfaces to help reduce water penetration in bathrooms, showers, balconies, and other wet areas. It can also be used as a preventive waterproofing maintenance treatment to help extend the serviceability and performance of existing waterproofing systems, reducing the risk of future leakage and costly repair work.

SS-10 SHOWER SEAL (1KG)

  1. Home
  2. Product List
  3. SS-10 SHOWER SEAL (1KG)
DPC DAMP PROOF COATING (4KG)
DPC DAMP PROOF COATING (20KG)
SS-10 SHOWER SEAL (1KG)

SS-10 SHOWER SEAL (1KG)

{{flexiArea.actual_rating}}
{{flexiArea.base_rating}}
Serial No: {{flexiArea.serial}}
{{flexiArea.sold_item | number:0}} Sold
Category: .
Tags: ,

FEATURES:

-SS10 is a ready-to-use aqueous silicone ester emulsion.
-SS10 provides long lasting sub-surface protection and does not change the surface appearance.
-SS10 does not form film on surface, thus eliminating the wearing off issue over times.
-SS10 has high surface colour stability, leaving minimal surface appearance changes.
-SS10 is easy to use: simply by spray or brush.

RM {{flexiArea.price}} RM {{flexiArea.factory_price}} RM {{flexiArea.before_promotion_price}} - {{flexiArea.dreate }}%

{{estShippingFee}}

- +
Add Cart Successfully

TOILET

  1. Ensure surface to be treated is clean and intact. It should be free from bitumen, oil, grease and loose particles. All the cracked and defective tile joints must be removed.
  2. Allow the toilet to dry for 1 day before application.
  3. Apply SS10 generously by brush or by spray, onto the entire wall and floor tile joints, edges of toilet bowls and nailing point of shower screen.
  4. After one hour, apply second coat of SS10.
  5. After one hour, patch back the defects on tile joints (if necessary, using tile grout added with W1 Cement Strengthener).
  6. Allow one day for the treatment to dry and cure.
  7. Job done.
     

Remark:

  • SS10 is to be absorbed into the substrate. Do not apply SS10 on non-absorbent surfaces, such as glass, aluminium, etc.
  • Wipe away excessive SS10 on surface after 30 minutes of application. Do not allow a thick patch of SS10 to air dry on the surface as it may cause unwanted surface stain.
  • Always conduct a patch test, by applying SS10 on a remote corner of the toilet. After 24 hours, check for any unwanted surface appearance changes. Carry out full application only when no surface change is visible.

Physical Form
White liquid with slight alcoholic odour.

DOWNLOAD CATALOGUE in PDF (Right Click–Save As)

1 L-bottle / 5 L-carboy

{{cartlist.length}}
{{flexiArea.stock == 1?'Add to Cart':'Out of Stock'}}

Extend Waterproofing Protection Without Major Renovation

WARRIOR SS-10 Shower Seal offers a practical and cost-effective way to maintain and protect wet area waterproofing systems without tile hacking or major renovation work. Whether used to help reduce existing leakage problems or as a preventive maintenance solution, SS-10 helps extend the durability and service life of bathroom waterproofing systems. Trusted for convenience and effective performance, WARRIOR SS-10 Shower Seal is an ideal DIY solution for modern homes and renovation maintenance.